News
Your position:Home > News > Industry News > DIY creative: IKEA lamps to ch.....

DIY creative: IKEA lamps to change a large lamp

  • Author:Eunice
  • Source:net
  • Release on :2015-11-23
        Shenzhen Risen OPTO Co.,Ltd,led RGB light supplier in china,LED RGB FLOOD Light with 24VAC Input Voltage,led lamp fixtures supplier.IKEA Rahm this table lamp is a very classic table lamp, some foreign friends bought some of them to transform, made into a large spherical lamp, the effect is quite good.

        Here are 6 of the process of the combination of Rahm, the theory of the maximum can be 120 of the. But if there are 3 questions to be done: it is too heavy, too bright, and there is a need for the structural mechanics to be particularly rigorous. If you are interested in this version, you can try it yourself, as an extracurricular exercise.

Step 1: Tools

        Before you start, you have to prepare the tools for the image above. The first iron burned a hole in the lampshade above, then connect the lamp strap. Then use the line to fix the line, of course, the method of fixed line do not know this one, you can also achieve the purpose by other means. You can put the lamp on the hanger and hang it on the roof.

Step 2: remove the light bulb
Remove the light bulb and remove the wire inside. And then synthesize the six shades of a pipe.

Step 3: hole burning in the chimney with iron
        Think what you have to do that a and with a marking pen down in the shade above the mark, and with a branding iron a hole out, this strapping band can from the middle of the past. Although it is not good to burn plastic in the house, but it is easier than it is to drill.

Step 4: wiring
        Stripped of power line, and then the wire to wire buckle (blue with blue, brown with brown). And then use the power cord to connect the four lines to two two.

Step 5: link light bulb
        The main step is to connect the light bulb with a band. Remember to stay outside, so that it's convenient for you to tighten. Don't pull the tie up at the beginning of the first, and then put the tie up when all the lights are connected. Then remember that in the middle of a hanger, easy to hang on the roof.

Step 6: be accomplished

More information please enter: http://www.outdoorlightingsupplier.com/